YShield L40 Shielding Paint (5 Litres) - No mixing with water required - NEW PRODUCT
Free Shipping
Made in Germany
This paint is very good value for money, it is already mixed, offers extremely good shielding properties and is easy to use with no smearing.
Between one and three layers are required depending on your required shielding needs, 2 coats minimum is the recommended.
A 1 litre mixture can cover 6 to 8 square meters depending on the surface it is being applied to.
Shielding paint for shielding high-frequency radiation (HF) and low-frequency electric fields (LF).
Protects against 5G.
Breathable, solvent-free, plasticizer-free and low-emission.
I offer free phone support for this product, as it is very important to do this correctly!
The L40 shielding paint is equally suitable for room and building shielding and for technical applications. L40 is finely pigmented and forms a hard, abrasion-resistant film that does not graphitize or smear. Universal adhesion on almost all substrates. Up to 90 dB at 40 GHz, (which in simple language means a protection from radio frequency of over 99.99%).
L40 shielding paint in detail
40 dB shielding attenuation at 1 GHz processed in two layers is absolutely sufficient for most applications.
No graphitization, no smearing and greatly reduced discoloration of the surface. Top coats adhere much better.
Very high film hardness and abrasion resistance for highly stressed surfaces. Can now be coated with water-based lacquer.
Fine pigmentation with d90 less than 40 µm; can therefore also be sprayed in technical applications.
Universal adhesion even on difficult and low-energy substrates.
Improved settling behaviour for easy stirring after long storage.
Optimized freeze-thaw resistance after freezing during shipping.
Optional fiber additive AF3: For crack bridging for better grounding, we recommend our fiber additive AF3 with long conductive carbon fibers.
Details on technical data and processing can be found in the download section below.
TÜV-SÜD certified: The certificate for “Building materials tested for harmful substances” guarantees you as a customer that the product does not contain any ingredients or emissions relevant to health. According to guideline TM-07, this product is solvent-free, plasticizer-free, without fogging-active substances, without heavy metals and very low in emissions.
Shielding attenuation
With a coverage of 4 sqm/l: Single layer 32 dB | double layer 40 dB | triple layer 43 dB
No nanotechnology
These shielding paints are developed according to strict ecological criteria. For example, we use the lowest-emission carbon black on the market and pure graphite. We deliberately avoid the use of graphene or even newer nanoplatelets, nanomaterials with a completely unclear hazard potential.
Grounding/Earthing
Must be grounded! We recommend using the earthing adaptor GF2 on this website as well as the conductive tape to ensure an adequate earth.
The earthing is very important and should be done in between coats and should be carried out by a registered electrician (I may be able to do this for you as I am a registered electrician).
Shielding attenuation HF & LF
This product shields high frequency electromagnetic fields (HF). Unless otherwise stated, the indicated dB-values apply to 1 GHz. Measurement from 600 MHz to 40 GHz according to standards ASTM D4935-10 or IEEE Std 299-2006. This product with an electrically conductive surface shields low-frequency alternating electric fields (LF).
Laboratory & expert report of shielding attenuation up to 40 GHz
YShield have already invested in their own professional EMV laboratory. They not only use it to create our laboratory screening reports but also to check each batch daily. Additionally, they have all products checked by an independent, well-respected expert. Double checked for twice the safety. Please find the reports below.
Ready for 5G
Some companies offer "special" 5G-products. This product shields all 5G-frequencies, even without advertising this! Find two gray bars in all shielding diagrams with the 5G frequency spectrums FR1 (600 MHz – 6GHz) and FR2 (24 GHz – 40 GHz).
Free Shipping
Made in Germany
This paint is very good value for money, it is already mixed, offers extremely good shielding properties and is easy to use with no smearing.
Between one and three layers are required depending on your required shielding needs, 2 coats minimum is the recommended.
A 1 litre mixture can cover 6 to 8 square meters depending on the surface it is being applied to.
Shielding paint for shielding high-frequency radiation (HF) and low-frequency electric fields (LF).
Protects against 5G.
Breathable, solvent-free, plasticizer-free and low-emission.
I offer free phone support for this product, as it is very important to do this correctly!
The L40 shielding paint is equally suitable for room and building shielding and for technical applications. L40 is finely pigmented and forms a hard, abrasion-resistant film that does not graphitize or smear. Universal adhesion on almost all substrates. Up to 90 dB at 40 GHz, (which in simple language means a protection from radio frequency of over 99.99%).
L40 shielding paint in detail
40 dB shielding attenuation at 1 GHz processed in two layers is absolutely sufficient for most applications.
No graphitization, no smearing and greatly reduced discoloration of the surface. Top coats adhere much better.
Very high film hardness and abrasion resistance for highly stressed surfaces. Can now be coated with water-based lacquer.
Fine pigmentation with d90 less than 40 µm; can therefore also be sprayed in technical applications.
Universal adhesion even on difficult and low-energy substrates.
Improved settling behaviour for easy stirring after long storage.
Optimized freeze-thaw resistance after freezing during shipping.
Optional fiber additive AF3: For crack bridging for better grounding, we recommend our fiber additive AF3 with long conductive carbon fibers.
Details on technical data and processing can be found in the download section below.
TÜV-SÜD certified: The certificate for “Building materials tested for harmful substances” guarantees you as a customer that the product does not contain any ingredients or emissions relevant to health. According to guideline TM-07, this product is solvent-free, plasticizer-free, without fogging-active substances, without heavy metals and very low in emissions.
Shielding attenuation
With a coverage of 4 sqm/l: Single layer 32 dB | double layer 40 dB | triple layer 43 dB
No nanotechnology
These shielding paints are developed according to strict ecological criteria. For example, we use the lowest-emission carbon black on the market and pure graphite. We deliberately avoid the use of graphene or even newer nanoplatelets, nanomaterials with a completely unclear hazard potential.
Grounding/Earthing
Must be grounded! We recommend using the earthing adaptor GF2 on this website as well as the conductive tape to ensure an adequate earth.
The earthing is very important and should be done in between coats and should be carried out by a registered electrician (I may be able to do this for you as I am a registered electrician).
Shielding attenuation HF & LF
This product shields high frequency electromagnetic fields (HF). Unless otherwise stated, the indicated dB-values apply to 1 GHz. Measurement from 600 MHz to 40 GHz according to standards ASTM D4935-10 or IEEE Std 299-2006. This product with an electrically conductive surface shields low-frequency alternating electric fields (LF).
Laboratory & expert report of shielding attenuation up to 40 GHz
YShield have already invested in their own professional EMV laboratory. They not only use it to create our laboratory screening reports but also to check each batch daily. Additionally, they have all products checked by an independent, well-respected expert. Double checked for twice the safety. Please find the reports below.
Ready for 5G
Some companies offer "special" 5G-products. This product shields all 5G-frequencies, even without advertising this! Find two gray bars in all shielding diagrams with the 5G frequency spectrums FR1 (600 MHz – 6GHz) and FR2 (24 GHz – 40 GHz).
Free Shipping
Made in Germany
This paint is very good value for money, it is already mixed, offers extremely good shielding properties and is easy to use with no smearing.
Between one and three layers are required depending on your required shielding needs, 2 coats minimum is the recommended.
A 1 litre mixture can cover 6 to 8 square meters depending on the surface it is being applied to.
Shielding paint for shielding high-frequency radiation (HF) and low-frequency electric fields (LF).
Protects against 5G.
Breathable, solvent-free, plasticizer-free and low-emission.
I offer free phone support for this product, as it is very important to do this correctly!
The L40 shielding paint is equally suitable for room and building shielding and for technical applications. L40 is finely pigmented and forms a hard, abrasion-resistant film that does not graphitize or smear. Universal adhesion on almost all substrates. Up to 90 dB at 40 GHz, (which in simple language means a protection from radio frequency of over 99.99%).
L40 shielding paint in detail
40 dB shielding attenuation at 1 GHz processed in two layers is absolutely sufficient for most applications.
No graphitization, no smearing and greatly reduced discoloration of the surface. Top coats adhere much better.
Very high film hardness and abrasion resistance for highly stressed surfaces. Can now be coated with water-based lacquer.
Fine pigmentation with d90 less than 40 µm; can therefore also be sprayed in technical applications.
Universal adhesion even on difficult and low-energy substrates.
Improved settling behaviour for easy stirring after long storage.
Optimized freeze-thaw resistance after freezing during shipping.
Optional fiber additive AF3: For crack bridging for better grounding, we recommend our fiber additive AF3 with long conductive carbon fibers.
Details on technical data and processing can be found in the download section below.
TÜV-SÜD certified: The certificate for “Building materials tested for harmful substances” guarantees you as a customer that the product does not contain any ingredients or emissions relevant to health. According to guideline TM-07, this product is solvent-free, plasticizer-free, without fogging-active substances, without heavy metals and very low in emissions.
Shielding attenuation
With a coverage of 4 sqm/l: Single layer 32 dB | double layer 40 dB | triple layer 43 dB
No nanotechnology
These shielding paints are developed according to strict ecological criteria. For example, we use the lowest-emission carbon black on the market and pure graphite. We deliberately avoid the use of graphene or even newer nanoplatelets, nanomaterials with a completely unclear hazard potential.
Grounding/Earthing
Must be grounded! We recommend using the earthing adaptor GF2 on this website as well as the conductive tape to ensure an adequate earth.
The earthing is very important and should be done in between coats and should be carried out by a registered electrician (I may be able to do this for you as I am a registered electrician).
Shielding attenuation HF & LF
This product shields high frequency electromagnetic fields (HF). Unless otherwise stated, the indicated dB-values apply to 1 GHz. Measurement from 600 MHz to 40 GHz according to standards ASTM D4935-10 or IEEE Std 299-2006. This product with an electrically conductive surface shields low-frequency alternating electric fields (LF).
Laboratory & expert report of shielding attenuation up to 40 GHz
YShield have already invested in their own professional EMV laboratory. They not only use it to create our laboratory screening reports but also to check each batch daily. Additionally, they have all products checked by an independent, well-respected expert. Double checked for twice the safety. Please find the reports below.
Ready for 5G
Some companies offer "special" 5G-products. This product shields all 5G-frequencies, even without advertising this! Find two gray bars in all shielding diagrams with the 5G frequency spectrums FR1 (600 MHz – 6GHz) and FR2 (24 GHz – 40 GHz).
This paint is black in colour. We recommend a minimum of 2 coats and then an undercoat can be applied over the top and then the final topcoat colours applied.
No nanotechnology
These shielding paints are developed according to strict ecological criteria. For example, we use the lowest-emission carbon black on the market and pure graphite. We deliberately avoid the use of graphene or even newer nanoplatelets, nanomaterials with a completely unclear hazard potential.
TÜV-SÜD certification
We have our shielding paints monitored by TÜV-SÜD. The whole production process including quality control, emission behaviour and economical use of preserving agents is subject to monitoring. Please find the certificate above at the downloads.
Grounding
This product with an electrically conductive surface has to be integrated into the functional-equipotential bonding (FEB). Please find suitable grounding accessories under "Grounding".
Shielding attenuation HF & LF
This product shields high frequency electromagnetic fields (HF). Unless otherwise stated, the indicated dB-values apply to 1 GHz. Measurement from 600 MHz to 40 GHz according to standards ASTM D4935-10 or IEEE Std 299-2006. This product with an electrically conductive surface shields low-frequency alternating electric fields (LF).
Laboratory & expert report of shielding attenuation up to 40 GHz
We have already invested in our own professional EMV laboratory years ago. We not only use it to create our laboratory screening reports but also to check each batch daily. Additionally, we have all our products checked by an independent, well-respected expert. Double checked for twice the safety. Please find the reports above at the downloads.
Ready for 5G
Some companies offer "special" 5G-products. This products shields all 5G-frequencies, even without advertising this! Find two gray bars in all shielding diagrams with the 5G frequency spectrums FR1 (600 MHz – 6GHz) and FR2 (24 GHz – 40 GHz).